Sikagard® Wood Preserver - Clear

£30.86

VAT included Shipping calculated at checkout.

Sikagard® Wood Preserver Clear is a solvent-free, low-odour treatment that penetrates deep into timber to protect against rot, decay, fungi, and wood-boring insects. Suitable for both interior and exterior use, it can be applied to damp timbers and dries quickly, allowing for overcoating with paint, stain, or varnish.

Colour: Clear

Size

5 Litre

Product variants

Delivery and Shipping

Place your order before 3pm for next working day delivery.

Please note: Additional delivery charges may apply for Northern Ireland, Isle of Wight, Isle of Man, Isles of Scilly, Scottish Highlands & Islands, and Channel Islands. We will contact you to inform you of any additional costs once your order is received, or you can call us on 0800 111 4898 beforehand to confirm.

Description

Solvent-Free, Deep-Penetrating Protection for Timber

Sikagard® Wood Preserver Clear is a low-odour, solvent-free wood treatment designed to protect timber from wet rot, dry rot, decay, fungi, and wood-boring insects. Utilizing micro-fine active technology, it ensures deep penetration into the wood, providing long-lasting protection. Suitable for both interior and exterior use, it can be applied to damp timbers without compromising performance.

Key Features & Benefits

Solvent-Free & Low Odour: Safe for indoor and outdoor applications.
Deep Penetration: Micro-fine active technology ensures thorough protection.
Fast Drying: Reduces downtime between application and overcoating.
Non-Flammable: Enhances safety during application and storage.
Versatile Application: Suitable for use on damp timbers.

Ideal For

Interior and exterior rough-sawn or planed timber.
Floorboards, joists, roof timbers, window frames, and doors.
Pre-treatment before painting, staining, or varnishing.

Product Details

Colour: Clear liquid.
Packaging: 5-litre tin.
Coverage: Approximately 3–4 m² per litre.
Drying Time: Allow at least 2 hours between coats.
Shelf Life: Use within 2 years of manufacture.
Storage Conditions: Store between +5°C and +25°C in original containers.

Application Instructions

Surface Preparation: Ensure timber is clean and free from coatings.
Application: Shake well before use. Apply by brush, spray, or dipping. Apply a minimum of two coats, allowing at least 2 hours between coats.
End Grain Treatment: Pay special attention to end grains. Where possible, dip or flood these areas for a minimum of 3 minutes.
Overcoating: Allow to dry fully (typically 48 hours indoors) before applying paint, stain, or varnish.