Damp & Mould Problems Commonly Found in Lofts (UK Guide)
Loft damp and mould are usually caused by condensation, poor ventilation, or hidden roof leaks. This UK guide explains the most common loft moisture problems, how to tell leaks from...
Blog
-
Damp & Mould Problems Commonly Found in Lofts (UK Guide) -
Damp & Condensation in Garages: Causes, Risks & FixesDamp & Condensation in Garages: Causes, Risks & Fixes
Damp garages and outbuildings often suffer from condensation, hidden mould, rusting tools, and timber damage. Learn how to diagnose the moisture source and apply fixes that actually last in UK...
-
Artex and Textured Coatings: What Homeowners Should Know Before Scraping or SandingArtex and Textured Coatings: What Homeowners Should Know Before Scraping or Sanding
Before you scrape or sand an “Artex” ceiling, stop and check what you’re dealing with. Some older textured coatings can contain asbestos, and the risk rises fast when you create...
-
Asbestos Sealers: What Are They (and When Are They Used)?Asbestos Sealers: What Are They (and When Are They Used)?
Asbestos sealers (encapsulants) are specialist coatings designed to lock fibres in place when asbestos-containing materials are being managed in situ. This guide explains the difference between encapsulation, enclosure and removal,...
-
Door Handle Parts Names: A Detailed Breakdown of Door Handles & Their ComponentsDoor Handle Parts Names: A Detailed Breakdown of Door Handles & Their Components
Learn the most common door handle parts names in the UK—from lever, rose and spindle to follower, latch bolt and strike plate—plus how to measure backset and PZ so you...
-
FFP2 vs FFP3 Masks Explained: Which One Do You Need for DIY?FFP2 vs FFP3 Masks Explained: Which One Do You Need for DIY?
Clean air matters on every refurb job — even the “quick” ones. This guide breaks down what FFP2 and FFP3 masks actually mean, the real differences in protection, how to...
-
How to Clean Mould from Grout & Silicone (Showers, Bathrooms & Kitchens)How to Clean Mould from Grout & Silicone (Showers, Bathrooms & Kitchens)
Black mould on grout and silicone is common in bathrooms and kitchens, but it doesn’t have to be permanent. Learn the safest ways to remove mould, lift staining, and know...
-
Mortice Door Locks Explained: Sashlocks, Deadlocks and All Their Parts NamesMortice Door Locks Explained: Sashlocks, Deadlocks and All Their Parts Names
Mortice door locks sit hidden in the edge of the door, but they do most of the hard work when it comes to security. In this guide we break down...
-
How to Clean Green Algae and Black Mould from Brick, Render and Concrete in the UK ClimateHow to Clean Green Algae and Black Mould from Brick, Render and Concrete in the UK Climate
Exterior walls, paths and render covered in green algae or black mould? This guide shows you how to safely clean brick, render and concrete in the UK climate, choose the...
-
How to Remove White Powder and Staining from Brick (Efflorescence Cleaning Guide)How to Remove White Powder and Staining from Brick (Efflorescence Cleaning Guide)
Brickwork covered in white powdery deposits or ugly stains can make even a good property look tired. This guide explains what efflorescence is, how to clean it off brick safely,...
-
How to Properly Soft Wash Your External Walls (UK Guide)How to Properly Soft Wash Your External Walls (UK Guide)
Learn how to safely soft wash external walls in the UK using low-pressure cleaning and specialist treatments to remove green algae, black mould and general grime without damaging brick, render...
-
The Truth About Bleach on Mould (and What Professionals Use Instead)The Truth About Bleach on Mould (and What Professionals Use Instead)
Bleach might make black mould stains disappear, but it rarely solves the real problem. On porous walls and ceilings it often just fades the mark while live mould remains in...
-
Complete Guide to Render Mix Ratios for UK DIY ProjectsComplete Guide to Render Mix Ratios for UK DIY Projects
Rendering a UK exterior wall? This guide shows the best sand–cement–lime ratios for scratch and top coats, when to use lime vs plasticiser, and how to prime tricky backgrounds with...
