Winter-Proof Your Home – Explore Our Damp & Mould Solutions Today!

  • Free UK Delivery

    On Qualifying Orders

  • Buy with Confidence

    100% secure purchases

  • Hassle Free Returns

    No hassle, simple returns policy

  • 1000's of satisfied customers

    And growing every single day

How Can I Restore a Faded Convertible Soft Top?

Renovo Fabric Soft Top Reviver in black for recolouring faded fabric convertible roofs

A sun-bleached, patchy hood can make an otherwise smart convertible look tired. Before you budget for a replacement roof, it’s worth knowing that a faded fabric soft top can often be brought back with a recolouring treatment, and it’s one of the most satisfying jobs you can do on a convertible. Here’s how to do it properly with Renovo Fabric Soft Top Reviver, including how much to buy, how long each stage takes and the mistakes that cause patchy results.

Older two-seater convertible with a patchy, sun-faded navy fabric hood parked on a sunny street

The Short Answer

Why Do Soft Tops Fade?

Sunlight is the main culprit, which is why Renovo talks about sun-faded soft tops and builds UV fade protection into its protectors. As Renovo puts it, a convertible living outside in British weather has a rather different life from a weekend car tucked away in a garage. Dirt ground into the fibres and worn waterproofing make the roof look duller still, and mould that has been left to take root can leave scarring that shows as lighter patches once the roof is cleaned.

Classic silver convertible with its roof folded, parked in bright sunshine

What Does Soft Top Reviver Do?

Renovo Fabric Soft Top Reviver is designed to restore, recolour and recondition fabric soft tops. Renovo describes it as simple to apply, with results even on faded roofs, and it can also be used to revive the fabric on the inside of the soft top.

Renovo Fabric Soft Top Reviver in black for recolouring faded fabric convertible roofs

What Reviver Can and Can’t Fix

It helps to set expectations before you start. Based on Renovo’s own advice:

  • Sun fading and patchy colour: this is exactly what Reviver is for.
  • Areas that have lost colour from mould: once the roof is thoroughly clean, Reviver can help mask them.
  • Fold and scuff marks over the roof bars: a clean and Reviver will freshen them up, but they’re caused by the fabric rubbing on itself as the roof folds, so they tend to come back with use.
  • White marks from a jet wash: these are usually where the pile has been blown off the fabric, which is irreversible. Reviver is likely to make them stand out more, because the damaged areas have less pile to absorb the colour.
  • Splits, worn stitching or a lifting rear window: these need a hood specialist.

Choosing the Right Colour

Reviver comes in five colours, so take care to choose the one you need. Renovo makes it to industry-standard Pantone numbers:

  • Black
  • Dark Blue – Pantone 282c
  • Dark Red – Pantone 202c
  • Dark Brown – Pantone 4625c
  • Dark Green – Pantone 5467c

It’s available in 500ml and 1 litre bottles. Whichever colour you choose, test it on a small, inconspicuous area and let it dry before you do the whole roof, so you can see the finished shade.

How Much Reviver Will I Need?

This is where most patchy results start, so it’s worth getting right. Running out part way through a coat almost always leaves a join line, because fresh Reviver seeps into the dried area and creates a double-dyed patch that’s hard to fix. Renovo’s guidance:

  • 1 litre covers about 5 square metres; 500ml covers about 2.5 square metres.
  • For an average-sized roof, one litre is usually enough for two coats, depending on condition.
  • For a larger roof, around the size of a Saab, BMW 3 Series or Mercedes CLK, Renovo suggests a litre just to be sure of completing one coat.
  • If you use more than half a litre on the first coat, buy another 500ml before you start the second.
  • If you’re using more than one bottle on the same roof, shake them well and combine them in one container (a clean paint kettle is ideal), then stir.

What You’ll Need

What you’ll need to restore a faded fabric roof

Renovo Fabric Soft Top Restoration Kit with cleaner, reviver and protector

Weather and Timing

Choose a day that isn’t too hot and is above freezing. Renovo suggests 13–18°C is ideal. Work on a cool, completely dry roof out of direct sunlight, and don’t start if rain is expected. Heat speeds up drying, giving you less time to work the Reviver in evenly and increasing the risk of application lines.

Plan the job over two days:

Stage Time (Renovo guidance)
Day 1: deep clean and remove old proofing Leave the cleaner about an hour, scrub with hand-hot water, rinse, and repeat as needed
Drying after cleaning Until completely dry (Renovo allows a good 24 hours after cleaning before proofing, so plan on the next day)
Day 2: first coat of Reviver Typically around three hours to dry
Second coat of Reviver Typically around three hours to dry
Fabric Soft Top Protector Once Reviver is completely dry; typically around three hours to dry

Step 1: Clean the Roof and Strip Old Proofing

The fabric must be thoroughly clean, completely dry and free from previous waterproofing. Renovo explains why: Reviver is water based, so if there’s waterproofer left in the fabric it can’t soak through evenly, and you’ll get a patchy result.

  1. Mist the roof with water, then paint on Renovo Fabric Soft Top Cleaner with a 5cm (2”) paintbrush.
  2. Leave it for about an hour. Renovo says this is the optimum time for the active ingredients to work when removing its Ultra Proofer.
  3. Scrub with hand-hot water and a bristle brush, taking care around stitched areas and windows. Renovo says hand-hot water is essential.
  4. Rinse off with water and repeat the whole process as necessary.
  5. Do the shower test. Use a watering can with a rose to simulate a shower of rain (not a downpour). If the water soaks into the fabric evenly across the whole roof, so will Reviver. If it beads anywhere, clean again and re-test.
  6. Let it dry completely.

If your roof has been treated with another brand of proofer, Renovo suggests contacting that manufacturer for advice on removing it.

Step 2: Test the Colour

Once the roof is clean and dry, apply a little Reviver to an inconspicuous area and let it dry so you can check the finished colour before continuing. Put your gloves on now: Reviver is a dye, and Renovo’s own guide has a cautionary tale about a colleague who skipped the gloves and had blue hands for quite some time.

Step 3: Apply the First Coat

  1. Shake, pour and stir. Shake the bottle thoroughly, pour into a clean container and stir well. Don’t dilute it or mix it with anything else.
  2. Start in the centre. Using your 5cm (2”) paintbrush, apply Reviver to the centre of the roof with smooth, even strokes, making sure the fabric is thoroughly wet.
  3. Work quickly outwards. Progress towards each side, the front and the back as quickly as you can, keeping a wet edge so each new section meets the last while it’s still wet.
  4. Don’t do one half then the other. Renovo warns that this can leave a visible join line down the middle of the roof.
  5. Wipe splashes immediately from paintwork, trim and glass with a damp cloth. If any Reviver does dry on, Renovo says it can usually be eased off paintwork or glass carefully with a thumbnail, or wiped with warm water and a good car shampoo.
  6. Leave it to dry, undisturbed. Typically around three hours, depending on conditions. Don’t expose it to rain or apply anything else until it’s completely dry.
  7. Clean your brush in warm, soapy water.

Gloved hand brushing black dye onto a faded fabric convertible roof, showing the restored colour beside the faded area

Step 4: Apply the Second Coat

For sun-faded soft tops, Renovo recommends at least two coats. Once the first coat is completely dry you’ll be able to judge the colour properly. Then repeat the same process across the whole roof. Don’t be tempted to load extra Reviver onto the most faded areas: an even coat over the entire roof gives a far more consistent finish. And check you have enough left to finish the full coat before you start.

Step 5: Lock in the Colour

Once the final coat is completely dry, protect your work. Renovo recommends Renovo Fabric Soft Top Protector to prolong the life of the newly restored colour. Ultra Proofer is neutral in colour, so it suits all shades, and it re-establishes the roof’s waterproof barrier, adds UV protection and resists mould and mildew. It’s exactly what you want if your roof has also been letting water in. Remember to stir it rather than shake it. Full method: Why Is My Car Soft Top Leaking Water?

Couple enjoying a sunny drive in a convertible with the roof down

Common Mistakes to Avoid

  • Leaving old proofer in the fabric. It’s the most common cause of patchy colour. Do the shower test.
  • Running out mid-coat. Buy enough first, and combine bottles in one container.
  • Treating only the faded patch. Always do the whole roof, or the result will look patchy.
  • Working in sun or on a warm roof. It dries too fast and leaves lines.
  • Doing one half of the roof, then the other. Work from the centre outwards.
  • Proofing before reviving. The order is always clean, restore, protect.
  • Skipping gloves.
  • Using Reviver on vinyl, or on cars with modified paintwork. Renovo advises against both.

How Often Should I Revive It?

For ongoing colour care, Renovo suggests using Reviver every 6 to 12 months, where required. Keeping the roof protected with Fabric Soft Top Protector about every six months helps the restored colour last longer in between.

Can I Recolour a Vinyl Roof?

Soft Top Reviver is for fabric roofs only and isn’t for use on vinyl. For vinyl, keep the roof clean with Renovo Vinyl Soft Top Cleaner and protect it with Renovo Vinyl Soft Top Protector, which includes UV fade protection. Not sure which type you have? See Is My Convertible Soft Top Fabric or Vinyl? How to Tell.

FAQs

How many coats of Soft Top Reviver do I need?

Renovo recommends at least two coats for sun-faded soft tops. Let each coat dry completely (typically around three hours) before applying the next.

Can I use Reviver on the inside of my soft top?

Yes. Renovo says Reviver can also be used to revive fabric soft top interiors.

Will Reviver get on my paintwork and windows?

Splashes happen, so keep a soft, damp cloth to hand and wipe them off straight away. Renovo’s products are water based, and it says masking is optional rather than essential.

Is 500ml enough for my roof?

500ml covers about 2.5 square metres, which can suit a smaller roof. For an average roof, a litre is usually enough for two coats, and Renovo suggests a litre per coat for larger roofs such as a Saab, BMW 3 Series or Mercedes CLK. If in doubt, buy more: running out mid-coat causes join lines.

Can I proof the roof straight after reviving it?

Yes, once the Reviver is completely dry. Apply Fabric Soft Top Protector last to protect the new colour and waterproof the roof.

Will Reviver hide jet-wash damage?

Usually not. Renovo explains that jet washing can blow the pile off the fabric, and Reviver is likely to highlight those areas rather than hide them.

Not sure which product suits your roof? Get in touch with the DIY Refurb team and we’ll point you in the right direction.