GoPoxy Poly Grout (White) – UV-Resistant, No-Mess, Fast-Cure

GoPoxy User Manual

GoPoxy Poly Grout (White) is a two-part polyaspartic-based, UV-resistant grout that keeps light colours bright without yellowing. The no-mess peel-off formula minimises residue and cleanup time while delivering a dense, waterproof, stain-resistant finish for residential and commercial tiling.

Each tube includes 1 mixing nozzle. GoPoxy Tool Kit required for application. Don’t have one? Grab it here – GoPoxy Toolkit.

Why Choose GoPoxy Polyurea?

• Fully UV-resistant: Maintains bright white and light tones—no yellowing.
• Fast cure: Surface dry in ~1 hour; fully cured in under 8 hours (conditions dependent).
• No-mess peel-off cleanup: Removes easily with minimal detergent, no haze.
• Waterproof & durable: Dense, non-porous, stain- and chemical-resistant finish.
• Crack & mold resistant: Solid, non-porous joint resists growth and micro-cracking.
• Versatile: Walls, floors, mitred edges; ceramic, porcelain and glass tiles.
• Low-VOC, solvent-free: Eco-considerate and non-hazardous.

How to Use

Preparation

• Ensure joints are clean, dry and free of adhesive.
• Protect porous or textured tiles with priming wax or masking tape.
• Always test on a small, inconspicuous area first.

Mixing & Application

• Open the sealed packaging only when ready to apply (material begins to set on air exposure).
• Insert the cartridge into a compatible grout gun and attach the mixing nozzle firmly.
• If too viscous, warm the cartridge in hand-hot water for 5–10 minutes (do not overheat).
• Discard the first ~40 cm to ensure full component mixing.
• Apply slowly to fully fill joints; use GoPoxy finishing tools for a smooth profile.

Curing

• Working time: limited—work continuously once dispensing begins.
• Surface dry: ~1 hour
• Full cure: <8 hours (temperature/humidity dependent)

Important vs. GoPoxy Epoxy Grout

• Polyurea is UV-resistant (won’t yellow); epoxy is not.
• Polyurea must be used in one go: once exposed to air it will set and cannot be reused (even with a new nozzle).
• Polyurea may be warmed gently for easier dispensing; do not heat epoxy.

Storage

• Store at 8–18 °C in a cool, dry place away from sunlight.
• Do not smoke or use near open flame.

Suitability & Limitations

• Not ideal for mosaics (time/cost) or very porous stone (e.g., sandstone).
• Work efficiently to avoid solidifying product in the tube.

Aftercare

• Clean with pH-neutral products only; avoid acidic/alkaline cleaners.
• Routine gentle cleaning helps maintain colour and finish.

PPE & Safety

• Read the instructions fully before use; keep away from children/animals.
• Eye/face: Safety glasses with side protection (BS EN ISO 16321-1:2022).
• Hands: Protective gloves (BS EN ISO 374). Replace at first signs of wear.
• Skin/body: Protective clothing as task requires (e.g., apron BS EN 14605:2005+A1:2009; footwear BS EN ISO 20345:2022+A1:2024).
• Respiratory: If ventilation is poor, use a mask (BS EN 136) with A2-P2 filter (BS EN 14387). For atmospheres beyond filter limits or <17% O₂, use SCBA per BS EN 137/138.

Specs at a Glance

Disclaimer

Performance depends on correct preparation, application and site conditions. Always test a small area first to confirm suitability, colour and finish. By using this product you accept responsibility for application outcomes. Safety Data Sheet available on request.