GoPoxy User Manual
GoPoxy Grout (Outdoor Use) brings our easy, “No-Mess” peel-off epoxy to exterior tiling. Designed for outdoor tiles and tough, high-moisture environments, it cures to a dense, non-porous finish that helps resist water penetration, staining, mould and mildew—while dramatically reducing cleanup time compared with traditional epoxies.
Each tube includes 1 mixing nozzle. GoPoxy Tool Kit required for application. Don’t have one? Grab it here – GoPoxy Tool Kit.
Key Benefits
-
No-Mess peel-off: Minimal residue and no harsh detergents needed.
-
Outdoor-ready: Formulated for exterior tiles and high-moisture use.
-
Waterproof & durable: Non-porous, chemical-resistant finish with excellent crack resistance.
-
Pre-dosed accuracy: Twin-cartridge format eliminates mixing errors (discard first 30–40 cm to ensure full mix).
-
Versatile: Suitable for outdoor walls/floors and indoor wet areas (bathrooms, showers, kitchens).
-
Eco-considerate: Non-hazardous and resealable for later use.
-
Stain resistance: Helps keep grout lines uniform for easier maintenance.
Important Notes for Outdoor Use
- Epoxy chemistry can yellow with prolonged UV exposure—prefer mid/dark colours outside or shaded locations to minimise visual change.
-
Not suitable for highly porous stone (e.g., limestone, sandstone) due to potential absorption of priming wax/grout.
How to Use
Preparation
- Ensure tile joints are clean, dry and free of adhesive.
- Protect edges on porous or textured tiles with priming wax or masking tape.
- Always test a small, inconspicuous area first.
Mixing
- Insert the GoPoxy tube into a compatible grout gun and attach the nozzle securely.
-
Discard the first 30–40 cm of output to ensure the two components are fully mixed.
Application
- Apply slowly to completely fill joints and avoid air bubbles.
- Use GoPoxy finishing tools for a smooth, professional result.
Curing
-
Light foot traffic: ~36 hours
-
Full cure: ~48 hours (temperature & conditions dependent)
Storage
- Store between 8–18 °C in a cool, dry place away from direct sunlight.
- For unused grout, cap the tube and fit a fresh nozzle before next use.
Suitability & Limitations
- Do not use on terracotta or surfaces adversely affected by epoxy.
- Colours shown are illustrative—consult the GoPoxy Colour Chart for selection.
- A slight sheen may be visible under certain lighting due to the waterproof finish—test first to confirm your preferred look.
Aftercare
- Clean with pH-neutral products only; avoid acidic/alkaline cleaners.
- Routine, gentle cleaning helps maintain appearance and performance.
Safety
- Read the instructions fully before use; ensure good ventilation.
- Wear suitable PPE (gloves, eye protection, mask) and keep out of reach of children and animals.
Specs at a Glance
| Chemistry |
Two-part epoxy (outdoor formula) |
| Format |
Twin-cartridge, pre-dosed |
| Included |
1 × mixing nozzle per tube |
| Cleanup |
No-Mess peel-off |
| Traffic / Cure |
Light foot traffic ~36 hrs; full cure ~48 hrs* |
| Tiles |
Ceramic & porcelain (outdoor walls/floors; indoor wet areas) |
| Storage |
8–18 °C; cool, dry, out of sunlight |
*Ambient temperature and humidity will affect cure.
Disclaimer of Liability
Performance depends on correct preparation, application and site conditions. Colour may vary with lighting, substrate and other factors. Always test a small area first to confirm suitability, colour and finish. By using this product, you accept responsibility for application outcomes and local compliance.