Post Extender (Quick-Fit, Oxide Red) is a fast, no-dig way to raise the height of an existing timber fence or gate post without replacing it. The heavy-duty steel collar sleeves over the original post, and the quick-fit clamp locks it securely, providing a rigid extension point for new rails, panels or trellis. The durable oxide red coating offers outdoor corrosion resistance and a tidy, professional finish.
Key Features & Benefits
-
Extend Without Replacement: Increase post height quickly—ideal for adding privacy panels or trellis.
-
Quick-Fit Clamp: Rapid tightening provides a secure, twist-resistant hold with minimal tools.
-
Rigid Support: Robust box section helps restore strength to weathered posts.
-
No-Dig Solution: Avoids disturbing existing foundations, paving or landscaping.
-
Durable Finish: Oxide red coating for long-lasting corrosion resistance outdoors.
Available Size
| To Suit Post Size (mm) |
To Suit Post Size (inch) |
| 75 × 75 |
3 × 3 |
Product & Technical Details
-
Type: Post extender (quick-fit clamp)
-
Material: Heavy-gauge steel
-
Finish: Oxide red coating
-
Fixing Method: Sleeve over existing post; tighten quick-fit clamp to secure
-
Applications: Raising fence/gate posts, fitting trellis or additional rails, minor post repairs
Instructions for Use
- Check the existing post is sound and plumb; replace severely decayed timber.
- Slide the extender over the post until fully seated. Align to fence line.
- Tighten the quick-fit clamp evenly for a rigid, twist-resistant hold.
- Fix the new extension timber or trellis to the extender as required; re-check tightness after settling.
Limitations & Precautions
- Not a substitute for structural design where high wind uplift or lateral loads are present—assess the fence line accordingly.
- Ensure the existing post and base are sound; do not use on rotten or loose posts without repair.
- Treat any cut end grain on new timber with suitable preservative.
A rapid, clean solution for increasing fence height and adding trellis—quick to clamp, corrosion-protected and ready to support new timber securely on existing posts.