Dryzone Drygrip Adhesive (Box of 12) - High-Performance Plasterboard Adhesive

High-Performance Plasterboard Adhesive for Damp-Proofing Systems – Ready to Use

Dryzone Drygrip Adhesive is a high-quality, ready-to-use adhesive specifically designed for bonding plasterboard directly to damp-proofing membranes, such as Dryshield Cream or meshed cavity drain membranes. Supplied in a box of 12 cartridges, it is ideal for use in drylining applications following the installation of chemical DPCs or internal waterproofing systems. Drygrip cures to form a strong, long-lasting bond while allowing the wall to breathe, ensuring compatibility with moisture-sensitive substrates.

Key Features & Benefits

• Specialist Adhesive for Damp Walls: Formulated for use after DPC installation or membrane fixing in damp-proofing systems.
• Strong & Flexible Bond: Provides long-term adhesion between plasterboard and uneven or treated substrates.
• Ready to Use: No mixing or preparation required — supplied in easy-to-apply 310ml cartridges.
• Breathable & Salt Resistant: Allows residual moisture to escape while resisting salt contamination.
• Box of 12: Ideal for trade use or large-scale refurbishment and renovation projects.

Product Details

• Type: Ready-to-use drylining adhesive
• Form: Thixotropic paste
• Container: 310ml cartridges (x12 per box)
• Cure Time: Approx. 12–24 hours depending on temperature and humidity
• Coverage: One cartridge typically covers 1.5–2.0m²
• Compatible With: Dryshield Cream, Dryzone DPC, Newton 803, 805 membranes, and other meshed membranes

Application Instructions

1. Surface Prep: Ensure membrane or treated wall is clean, dry to the touch, and properly fixed. Remove loose dust and debris.
2. Apply Adhesive: Cut nozzle at 45°, load cartridge into standard applicator gun, and apply dabs or beads to the board in vertical lines or dots.
3. Fix Board: Press plasterboard firmly onto the wall and adjust into final position. Leave to cure before finishing.
4. Finishing: Once cured, boards can be skim-coated or joint filled as required.

Limitations

• Not suitable for external use or continuous water exposure.
• Only to be used on membranes or walls treated with appropriate damp-proofing systems.

Health & Safety

Low-hazard formulation. Use standard PPE including gloves and goggles during application. Refer to the Safety Data Sheet (SDS) for full safety guidance.