Brick Reinforcement Coil – A2 Stainless Steel (65mm x 20m) is backordered and will ship as soon as it is back in stock.
Pickup available at Hilton Industrial Estate
Usually ready in 2 hours
Place your order before 3pm for next working day delivery.
Please note: Additional delivery charges may apply for Northern Ireland, Isle of Wight, Isle of Man, Isles of Scilly, Scottish Highlands & Islands, and Channel Islands. We will contact you to inform you of any additional costs once your order is received, or you can call us on 0800 111 4898 beforehand to confirm.
Brick Reinforcement Coil – A2 Stainless Steel (65mm x 20m)
Produced for brick and block work reinforcement to help prevent cracking in masonry. Manufactured from A2 (304) stainless steel for ultimate corrosion resistance, it’s the preferred choice where there’s a corrosive environment or where the base material has inherent corrosive characteristics (e.g. Green Oak).
| Product | Brick Reinforcement Coil |
|---|---|
| Width (W) | 65mm |
| Length (m) | 20m |
| Length (ft) | 65ft |
| Material | Austenitic Stainless Steel (A2-304) |
| Corrosion rating (1–5) | 4 – Urban & industrial areas with a moderate salt atmosphere |
| Pack type | Unit |
| Pack quantity | 1 Each |
| Pack dimensions (L × W × H) | 195 × 195 × 70mm |
| Pack weight | 0.9kg |
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Safeguard
Safeguard Dryrod Damp-Proofing Rods - 50 Pack - For Rising Damp
Biokil Crown
Biodry DPC Damp Proof Injection Cream - 600ml - Cmehical DPC for Rising Damp
Biokil Crown
Speedsil 2000 (Concentrate) – Chemical DPC Injection Fluid (5L) - Biokil Crown
Learn how to fit an outside tap with this practical DIY garden tap fitting guide. We cover safety checks, kit contents, backflow protection, installation steps, common mistakes, troubleshooting and winter...
100% cement-free plaster coats are widely used in renovation and restoration projects where breathability, compatibility, and traditional wall performance matter. This guide explains where they are used, why they suit...
Cable ties, also known as tie wraps, are useful for far more than just bundling wires. This guide explores practical cable tie uses around the home, garden, garage, workshop, and...
Choosing plaster for a listed building is not the same as plastering a modern home. This guide explains why most listed buildings in the UK are best repaired with a...
Garden subsidence can turn small dips into sinking patios, uneven paths and leaning walls. This UK guide explains the most common causes—clay soil, poor sub-bases and drainage problems—and shows you...
Find out when the best time of year is to treat woodworm in the UK, why September to April is often the optimum treatment window, and what to do if...
Patio slabs that sit too high against your home can cause damp problems, blocked air bricks, and long-term structural damage. Learn how to spot the warning signs, understand the risks,...
Weep holes are small drainage openings in brick walls that allow trapped moisture inside cavity walls to escape. This guide explains why they are commonly installed above windows, how to...
Produced for brick and block work reinforcement to help prevent cracking in masonry. Manufactured from A2 (304) stainless steel for ultimate corrosion resistance, it’s the preferred choice where there’s a corrosive environment or where the base material has inherent corrosive characteristics (e.g. Green Oak).
| Product | Brick Reinforcement Coil |
|---|---|
| Width (W) | 65mm |
| Length (m) | 20m |
| Length (ft) | 65ft |
| Material | Austenitic Stainless Steel (A2-304) |
| Corrosion rating (1–5) | 4 – Urban & industrial areas with a moderate salt atmosphere |
| Pack type | Unit |
| Pack quantity | 1 Each |
| Pack dimensions (L × W × H) | 195 × 195 × 70mm |
| Pack weight | 0.9kg |
