GoPoxy User Manual
GoPoxy Epoxy Grout is the ultimate “No-Mess” epoxy solution for fast, clean installs. The easy peel-off formula saves hours of cleanup compared with traditional epoxies, delivering a uniform, stain-resistant finish that stands up to water, traffic and daily cleaning.
Each tube includes 1 mixing nozzle. GoPoxy Tool Kit required for application. Don’t have one? Grab it here – GoPoxy Tool Kit.
Why Choose GoPoxy?
-
No-Mess Peel-Off: Lifts away cleanly with little to no residue—minimal detergents required.
-
Pre-Dosed Precision: Twin-cartridge format removes mixing errors (discard first 30–40 cm to ensure full mix).
-
Waterproof & Durable: Cures to a dense, non-porous finish that helps resist moisture, mold and mildew.
-
Stain Resistant: Helps keep grout lines uniform and easy to maintain.
-
Versatile: Floors and walls; ceramic and porcelain tiles.
-
Eco-Considerate: Non-hazardous formula; resealable for later use.
Typical Applications
- Large floors & high-footfall areas
- Bathrooms, showers, wet rooms & kitchens
- Commercial spaces where speed and clean finishes matter
How to Use
Preparation
- Ensure tiles are fully set; joints must be clean, dry and free from adhesive.
- Use priming wax or tape to protect edges on porous/textured tiles.
- Always test a small, inconspicuous area first.
Mixing & Priming
- Insert the GoPoxy tube into an appropriate grout gun, attach the mixing nozzle securely.
-
Discard the first 30–40 cm of output to ensure thorough component mixing.
Application
- Apply steadily to fully fill joints; avoid trapping air.
- Use GoPoxy finishing tools for a smooth, professional profile.
-
Mandatory test: Always trial on a small area before full application.
Curing
-
Working time (after dispensing): ~30 minutes*
-
Final cure: ~6–12 hours depending on temperature*
*Ambient conditions will affect open time and cure.
Storage
- Store between 8–18 °C in a cool, dry place away from sunlight.
- For unused grout, cap the tube and fit a new nozzle before next use.
Important Notes
- Not for terracotta or surfaces adversely affected by epoxy—test first.
- Epoxy products are not UV resistant; lighter colours may yellow/fade under UV. For outdoor use, select products from our Outdoor or Poly ranges.
- A slight sheen may be visible under certain lighting due to the waterproof finish—always test to confirm your preferred look.
- Colours shown are illustrative; consult the GoPoxy Grout Chart for accurate selection.
Aftercare
- Clean with pH-neutral products only; avoid acidic or alkaline cleaners.
- Routine gentle cleaning maintains appearance and performance.
Safety
- Read instructions fully before use.
- Wear suitable PPE (gloves, eye protection, mask) and ensure good ventilation.
- Keep out of reach of children and animals.
Specs at a Glance
| Format |
Twin-cartridge, pre-dosed epoxy grout |
| Included |
1 × mixing nozzle per tube |
| Working time |
~30 minutes (after dispensing) |
| Full cure |
~6–12 hours (temperature-dependent) |
| Substrates |
Ceramic & porcelain (walls & floors) |
| Cleanup |
No-Mess peel-off; minimal detergent |
| Storage |
8–18 °C; cool, dry, out of sunlight |
Disclaimer of Liability
GoPoxy is manufactured to high standards, but performance depends on correct preparation, application and site conditions. Colour can vary with lighting, substrates and other factors. The user must confirm suitability via a small test area before full application. By using this product, you accept responsibility for outcomes arising from application conditions, incompatible materials, environmental factors or deviations from instructions.