Safeguard Dryzone DPC Damp Proof Injection Cream – 5L

£126.00

VAT included Shipping calculated at checkout.

Safeguard Dryzone DPC Cream is a high-strength injection cream for treating rising damp in masonry walls. Supplied in a 5L container, it is quick to apply, BBA approved, and suitable for use on brick, stone, and rubble-filled walls. Creates a reliable chemical damp-proof course with minimal disruption.

Size

5 Litre Tub

Product variants

Delivery and Shipping

Place your order before 3pm for next working day delivery.

Please note: Additional delivery charges may apply for Northern Ireland, Isle of Wight, Isle of Man, Isles of Scilly, Scottish Highlands & Islands, and Channel Islands. We will contact you to inform you of any additional costs once your order is received, or you can call us on 0800 111 4898 beforehand to confirm.

Description

High-Performance Damp-Proofing Cream for Remedial DPC Treatment

Safeguard Dryzone is a patented, high-strength damp proofing injection cream formulated to control rising damp in masonry walls. Supplied in a 5L container, it offers a quick, clean, and effective solution for creating a chemical damp-proof course (DPC) in brick, stone, and rubble-filled walls. Dryzone is BBA approved and compatible with all common wall types, delivering long-lasting protection in heritage, residential, and commercial buildings.

Key Features & Benefits

Effective Against Rising Damp: Formulated to stop moisture rising through capillary action in masonry walls.
Quick & Clean Application: No spillage or waste – injected directly into pre-drilled holes using a suitable applicator gun.
Long-Lasting Performance: Once cured, it forms a durable chemical DPC that prevents damp for decades.
BBA Approved: Certified to BBA Certificate No. 97/3363 for use in masonry and cavity wall construction.
Minimal Disruption: Non-drip, low-odour formulation ideal for use in occupied buildings or sensitive environments.

Product Details

Type: Silane/siloxane-based injection cream
Container Size: 5 Litres
Coverage: Approx. 50 linear metres of 9" (225mm) thick wall per 5L
Application: Inject into 12mm diameter holes at 120mm centres along the mortar course
Suitable Substrates: Brick, stone, cavity walls, rubble-core masonry
Tool Required: Dryzone Applicator Gun or similar pressure injection system
SKU: DRYZONE5L

Application Instructions

Preparation: Drill 12mm holes along a continuous mortar joint at 120mm intervals. Recommended height is 150mm above external ground level.
Injection: Fill each hole with Dryzone cream using an applicator gun, starting at the rear and slowly withdrawing the nozzle.
Finishing: Plug or fill holes as needed once cream has been fully injected.
Post-Treatment: Remove or treat salt-contaminated plaster and re-plaster using a breathable renovation render or salt-resistant plaster.

Limitations

Do not apply to walls with standing or pressurised water — use in conjunction with appropriate damp-proofing systems.
Not suitable for use below -5°C or in saturated structural conditions without drainage correction.

Health & Safety

Contains silane/siloxane – avoid contact with eyes and skin. Use gloves and eye protection during application. Refer to the Safety Data Sheet (SDS) before use.