HMG Thinner 2601 1lt

HMG Thinner 2601 is a fast, solvent-based thinner designed for use with recommended HMG coating systems. It is used to adjust the viscosity of compatible coatings for easier application, improved flow, and the correct finish where HMG specifies Thinner 2601 in the relevant product datasheet. HMG lists the product code as TNR2601 and describes it as “a fast thinner for use in recommended HMG systems.”

It is commonly associated with HMG 2K and refinishing systems such as Acrythane 102, Acrythane Fluorescent, Acrythane SC601 Colours, Acrythane XSC21, Acrythane XSC21 Clear, Acrythane XSC98 11, Monothane 2K Topcoat, Superthane, Polykote 2K AMC Primer, Polykote 2K MU Primer, Polykote 2K TAP Primer, Polykote HS Rapidbuild 2K Primer, and Speedbuild 3 Primer. Supplier listings also describe it as suitable for Acrythane, Monothane, and Polykote primer systems.

Key details: flashpoint -17°C, store between 5°C and 25°C, keep cans sealed when not in use, and use within 12 months from delivery when kept in original sealed containers. Always refer to the SDS, product datasheet, and tin label before use.

Safety note: the safety data sheet identifies Thinner 2601 as for professional use only and for surface coating / thinner / diluent applications; it is not intended, labelled, or packaged for consumer use. It is classified as a highly flammable liquid and vapour and may cause skin irritation, serious eye irritation, respiratory irritation, long-term hearing-organ damage through repeated exposure, and may be fatal if swallowed and enters airways. Use good ventilation, keep away from ignition sources, and wear suitable eye protection, solvent-resistant gloves, and any respiratory protection required by the SDS or site risk assessment.