Soudal Soudafix P300-ST - Heavy Duty Polyester Resin

£7.24

VAT included Shipping calculated at checkout.

Soudal Soudafix P300-ST is a high-performance, styrene-free polyester resin designed for anchoring threaded rods, bolts, and rebar into concrete, masonry, and stone. Suitable for both solid and hollow substrates, it cures quickly and provides durable load-bearing support. Easy to apply with a standard gun.

Quantity

Single Tubes Box of 12

Size

410ml

Product variants

Delivery and Shipping

Place your order before 3pm for next working day delivery.

Please note: Additional delivery charges may apply for Northern Ireland, Isle of Wight, Isle of Man, Isles of Scilly, Scottish Highlands & Islands, and Channel Islands. We will contact you to inform you of any additional costs once your order is received, or you can call us on 0800 111 4898 beforehand to confirm.

Description

High-Performance Polyester Resin for Heavy-Duty Anchoring

Soudal Soudafix P300-ST is a two-component, styrene-free polyester resin specifically developed for strong and reliable anchoring of threaded rods, bolts, and rebar into concrete, masonry, and stone. Suitable for medium to heavy-duty fixings in both solid and hollow substrates, it provides fast curing, excellent load-bearing performance, and ease of application with standard sealant guns.

Key Features & Benefits

High Bond Strength: Provides secure and durable anchorage for metal fixings in concrete and masonry.
Styrene-Free Formula: Low odour and environmentally friendly for safer indoor use.
Fast Curing: Quick setting times reduce installation delays and downtime.
Easy Application: Compatible with standard sealant guns — no special tools required.
Versatile Use: Suitable for solid and hollow substrates with appropriate sleeves.

Product Details

Type: Two-component polyester resin
Base: Styrene-free polyester
Colour: Grey
Packaging: 300ml cartridge (fits standard gun)
Temperature Resistance: Up to +80°C (short term)

Application Instructions

Surface Prep: Clean the drill hole thoroughly using brush and air pump. Remove all dust and debris.
Mix & Inject: Insert cartridge into gun and attach mixing nozzle. Discard initial portion until colour is uniform, then inject into hole.
Insert Fixing: Push threaded rod or anchor into the filled hole with a twisting motion.
Allow to Cure: Let resin fully cure before applying loads (refer to label for curing times).

Limitations

Not suitable for water-filled or frost-prone holes during curing.
Use correct installation technique and sleeve for hollow substrates.

Health & Safety

Avoid contact with skin and eyes. Use gloves and ensure adequate ventilation during use. Refer to the Safety Data Sheet (SDS) for full health and safety instructions.