Mapei Latexplan Trade - Two-Part Self-Levelling Compound

Two-Part Self-Levelling Compound for Interior Floor Preparation

Mapei Latexplan Trade is a high-performance, two-part self-levelling and smoothing compound designed for levelling differences in thickness from 3 to 10 mm in a single application. It is suitable for preparing new and existing substrates before installing various types of floor coverings. The product is protein-free with low odour and high compressive strength, making it ideal for use in inhabited or confined spaces.

Key Features & Benefits

• Two-Part System: Comprises a 25 kg grey powder (Part A) and a 5 kg synthetic rubber latex liquid (Part B).
• Application Thickness: 3 to 10 mm in one application.
• Fast Setting: Walkable after approximately 1.5–2 hours; ready for floor coverings after about 12 hours.
• Low Odour: Suitable for use in occupied areas.
• High Compressive Strength: Achieves 26 N/mm² after 28 days.
• Underfloor Heating Compatible: Suitable for use with underfloor heating systems.
• Moisture Tolerant: Can be used under surface membranes like Mapeproof ESM.
• Low VOC Emissions: EMICODE EC1 Plus certified.

Product Details

• Packaging: Part A: 25 kg bag; Part B: 5 kg bottle.
• Colour: Part A: Cement grey; Part B: White.
• Mixing Ratio: 5 kg of Part B liquid to 25 kg of Part A powder.
• Coverage: Approximately 6 m² at 3 mm thickness per 30 kg unit.
• Application Temperature: +5°C to +35°C.
• Workability Time: 20–30 minutes at +23°C.
• Setting Time: 45–60 minutes.
• Shelf Life: Part A: 12 months; Part B: 24 months when stored correctly.

Application Instructions

1. Surface Preparation: Ensure the substrate is clean, dry, and free from contaminants.
2. Priming: On porous substrates, apply a suitable primer like Eco Prim T Plus.
3. Mixing: Shake Part B liquid and pour into a clean container. Gradually add Part A powder while mixing with a low-speed drill until a homogeneous, lump-free mix is achieved.
4. Application: Pour the mixture onto the prepared substrate and spread using a smooth-edged trowel to the desired thickness. A spiked roller can be used to eliminate air bubbles and ensure a smooth finish.
5. Drying: Allow to set for 1.5–2 hours before light foot traffic. Floor coverings can be installed after approximately 12 hours, depending on conditions.

Limitations

• Not suitable for external applications.
• Do not add extra water or latex to the mix.
• Ensure substrate temperature is above +5°C during application.

Health & Safety

Refer to the Safety Data Sheet (SDS) for detailed information on handling, storage, and disposal.