Reinforced Aluminium Foil Tape - 45m x 50mm

Reinforced Aluminium Foil Tape is a professional-grade sealing and joining tape for HVAC and insulation work where added strength is required. An integral fibre mesh toughens the foil for stronger joints, while a peel-away liner ensures clean, accurate application. The tape forms a durable, heat- and moisture-resistant seal on smooth, dust-free surfaces.

Key Features & Benefits

• Reinforced Strength: Integral fibre mesh resists tearing and supports tougher joints.
• Heat & Moisture Resistant: Creates durable, air-tight seams on ducts and foil-faced insulation.
• Clean Application: Peel-off release paper for precise placement with minimal wrinkles.
• Reflective Foil Face: Assists with radiant heat reflection at joints and seams.

Product & Technical Details

• Type: Reinforced aluminium foil joining & sealing tape (self-adhesive)
• Colour/Finish: Silver, reflective foil
• Size: 45 m length × 50 mm width
• Liner: Peel-off release paper
• Pack Size: 1 roll

Suitable Applications

• Sealing HVAC ducting seams and end caps
• Joining foil-faced insulation boards and quilts
• General sealing around vents, pipes and building services

Instructions for Use

1. Ensure substrates are clean, dry and free from dust, oil and release agents.
2. Measure and cut; peel a short section of liner to start and align the tape.
3. Apply with firm, even pressure from the centre outward; remove the liner progressively to avoid creases.
4. Overlap joints by at least 25 mm; press down with a roller or squeegee for best adhesion.

Limitations & Precautions

• Not a structural fixing; do not use where mechanical fastening is required.
• Adhesion may be reduced on damp, dusty, textured or low-energy plastics—test small areas first.
• Apply in dry conditions; avoid prolonged water immersion or direct flame contact.

Reinforced Aluminium Foil Tape (45 m × 50 mm) delivers a clean, durable, reflective seal for insulation joints, ducting and pipework in building services and refurbishment projects.